• My PI Interface for OPC HDA and Data source are running in a different Machines but they are in same network, I am able connect & read data from OPC server using PI OPC HDA Client tool from Interface machine. at his case Do i need to configure DCOM settin

    My PI Interface for OPC HDA and Data source are placed in a different Machines but they are in same network, But I am able connect to OPC  server & read data fusing ''PI OPC HDA Client tool'' from the Interfa...
    Zak_Cat
    last modified by Zak_Cat
  • PI-OPC-DA-Server-2018-Patch-1-(x64) High CPU Usage after upgrading from OPC DA Server 2018

    PI-OPC-DA-Server-2018-Patch-1-(x64) High CPU Usage after upgrading from OPC DA Server 2018. With one OPC connected client, cpu% is ~15% for the PI OPC DA Server service. Once the OPC client disconnects, cpu jumps to 5...
    ddnelson
    created by ddnelson
  • Writting from PI Point to OPC Client Item

    Hi all,   I would like to be able to read/write value from an OPC Client in the PI DA.   First I have configured two OPC Interfaces : One to read (PS_Read) One to write (PS_Write) Note: the buffering sy...
    GuillaumeGSK
    last modified by GuillaumeGSK
  • ProVOX OPC Configuration

    Hello,    We are having a PI system with OPC interface getting data from ProVOX DCS through a ProVOX OPC Server.    I was wondering if anyone might have past experience or currently is using ProV...
    andymai
    last modified by andymai
  • Automate Backfilling via HDA for OPC DA Tags

    Hi   Doens anybody has a good idea how to backfill Pi DA using OPC HDA Interface for tags which get event normally via OPC DA?   Actually we have massive probs with the T3000 UA Server and Pi. We use the ...
    UKullmann
    last modified by UKullmann
  • Can I receive the value with bad quality by OPC interface ?

    Can I receive the value with bad quality by OPC interface ?     For example, can I receive 300.00 for FT-1104.PV to replace "Bad" value ?   Thank you.
    CSCT64
    last modified by CSCT64
  • Buffer misconfiguration

    I am having issue with windows 2003 OPC- PI interface, IO rate is frozen plus it is written in ICU that there is buffere misconfiguration
    Manal
    last modified by Manal
  • OPC HDA History Recovery

    Our OPC server had an 8 hour outrage about 16 hours ago, now I need do a history recovery to fill in the data gap. Can you just simply set the History Recovery Maximum Time to 24 hours and restart the OPC HDA int...
    LingYang
    last modified by LingYang
  • Value cant show

    Hello dude,   Yesterday, my OPC server has been down. Now my OPC running normally. And the value just show "configure". Well, whats should gonna check right now?   Regards
    filzamaulana
    last modified by filzamaulana
  • Siemens S7-1500 to Factorytalk ME and need data buffer

    Hi -    I am setting up a new Siemens S7-1500 PLC that is supposed to talk to an existing Factorytalk ME as the SCADA end. I am exploring my options but one of the main goals I am requested to accomplish i...
    Abed
    last modified by Abed
  • Retreive data from scheineider ion (dekstop app)

    Hello mates   Anyone have succesfully retreive data from Schneider Ion? and make visualization with PI Vision?   Best Regards   Filza
    filzamaulana
    last modified by filzamaulana
  • Forced Server Level Fail over?

    Hi, does anyone know how to force a server level fail over? I know this can be done for UniInt fail over by changing the UFO Active ID (I use a calculation in PI AF to do that).     But I'm looking fo...
    JaredGoretzky
    last modified by JaredGoretzky
  • Buffering Backlog data

    Hello All,   I am trying to flush buffered data from a PI Collector or Interface node. Is there any command i need to execute for backlogged data to be flush. Restarting the interface, usually results in a data l...
    Bille
    last modified by Bille
  • UniInt activation on PI_OPC_DA to DeltaV

           Dear PI Administrators         I've recently activated the redondancy from PI_OPC_DA interfaces to a DeltaV OPC Server and a WinCC  OPC ser...
    FMFVHennard
    last modified by FMFVHennard
  • Problem with creating health points

    Good morning to you all, it will be my first question here on forum.   I am setting up two Opc interfaces sending the data from 2 point sources. I am using Opcint.exe to create the instance of that interfaces. E...
    szymos
    last modified by szymos
  • PI OPC DA/HDA Server - Can't find "OPCInt.exe"

    Hi, I have installed PI server (2012) and then PI OPC DA/HDA Server (2010) in the same virtual machine (both OSIsoft vcampus license). When I try to configure a new interface, using the "Create a new interface insta...
    wagner.alvarenga
    last modified by wagner.alvarenga
  • OPC Emerson Ovation using PI Interface OPCInt

    Hi community,     Question with the issues. 1. When clicking the [List] in OPC Client Tool I am encountering this.    But currently, opc ovation to pi opc client tool is Running.&#...
    RoyRobinJr
    last modified by RoyRobinJr
  • Running both OPC DA and HDA with single Point Source

    Dear Team,   Can we run both PI Interface for DA and HDA on same point source at the same time?   Before this, we were changing the PI Interface from HDA to DA connection. The DA run perfectly but if possi...
    Saif21
    last modified by Saif21
  • History recovery for given range of dates using PI Connector for OPC UA

    Hi All Is anybody know how to do preliminary history recovery for given range of dates using PI Connector for OPC UA. I suspect to use HistoryRecoveryCache.js file but I'm not sure what standard of data representati...
    MARILLION
    last modified by MARILLION
  • EuroMap63 Interface

    hi everyone,   just wondering if if anyone has managed to get an interface to plastic moulding machines that run the EuroMap63 interface?   we use FANUC and Engel electric machines, we are struggling to ge...
    bradykp
    last modified by bradykp