Is this for a ProcessBook display?
If so, have you considered using a Multistate symbol? You can set the multistate to use a performance equation such as:
if TimeGT('sinusoid','*-30m','*',100) >= 1800 then 1 else 0
which means "If sinusoid is greater than 100 for more than 1800 seconds in the last 30 minutes, return 1, else, return 0"
thanks for the reply
It is a "tag" value if it remains above the threshold "100" for more "1800 sec" to change the status "Color" from green to red.
1 of 1 people found this helpful
You can set the color by configuring the multistate to be one color from 0-0.99 and then another from 1->infinity. The tag can be whatever you tag you want it to be. Just type the tag name inside the quotes.